Hares and Seed Heads S...
Indian Wooden Printing Blocks- Set of Hares and Seed Heads Leaping Hare: 11 x 6cm Sitting Hare 6 x 7.5cm Country Seed Head 5.5 x 7.5cm Twisted Leaf Stem 3 x 5cm Flower 4 x 4cm All of our wood mounted rubber printing blocks can be used to hand print your own Fabric, Paper, Card & Clay! When printing fabric it’s important to use a fabric paint, or medium so the design is totally washable, but when printing onto paper and card you can use a wide variety of paints and inks. We do find that Ink pads can sometimes not be wet enough to use with the wooden blocks so we advise that paint works better. You apply your paint, ink or dye using a square piece of sponge. It’s very important to use a foam printing matt or something soft underneath the item you are printing on to ensure you get a good print!
$ 26.92
$35
(Inclusive of all taxes)
-
No Warranty
-
COD Not Avilable
-
Non Returnable
-
Non cancelable
About this item
Indian Wooden Printing Blocks- Set of Hares and Seed Heads
Leaping Hare: 11 x 6cm
Sitting Hare 6 x 7.5cm
Country Seed Head 5.5 x 7.5cm
Twisted Leaf Stem 3 x 5cm
Flower 4 x 4cm
All of our wood mounted rubber printing blocks can be used to hand print your own Fabric, Paper, Card & Clay! When printing fabric it’s important to use a fabric paint, or medium so the design is totally washable, but when printing onto paper and card you can use a wide variety of paints and inks. We do find that Ink pads can sometimes not be wet enough to use with the wooden blocks so we advise that paint works better. You apply your paint, ink or dye using a square piece of sponge. It’s very important to use a foam printing matt or something soft underneath the item you are printing on to ensure you get a good print!
To clean your blocks in-between colors just wipe with a dry rag, and once finished printing wash your wooden block under the tap with warm water, scrub all the paint out of the design using a nail brush and then dry well.
Indian Wooden Printing Blocks- Set of Hares and Seed Heads
Leaping Hare: 11 x 6cm
Sitting Hare 6 x 7.5cm
Country Seed Head 5.5 x 7.5cm
Twisted Leaf Stem 3 x 5cm
Flower 4 x 4cm
All of our wood mounted rubber printing blocks can be used to hand print your own Fabric, Paper, Card & Clay! When printing fabric it’s important to use a fabric paint, or medium so the design is totally washable, but when printing onto paper and card you can use a wide variety of paints and inks. We do find that Ink pads can sometimes not be wet enough to use with the wooden blocks so we advise that paint works better. You apply your paint, ink or dye using a square piece of sponge. It’s very important to use a foam printing matt or something soft underneath the item you are printing on to ensure you get a good print!
To clean your blocks in-between colors just wipe with a dry rag, and once finished printing wash your wooden block under the tap with warm water, scrub all the paint out of the design using a nail brush and then dry well.